Please use this identifier to cite or link to this item: http://localhost:8080/xmlui/handle/123456789/3123
Full metadata record
DC FieldValueLanguage
dc.contributor.authorNagendra, B-
dc.contributor.authorSijla Rosely, C V-
dc.contributor.authorLeuteritz, A-
dc.contributor.authorReuter, U-
dc.contributor.authorBhoje Gowd, E-
dc.identifier.citationACS Omega, 2(1):20-31en_US
dc.description.abstractSonication-assisted delamination of layered double hydroxides (LDHs) resulted in smaller-sized LDH nanoparticles (∼50−200 nm). Such delaminated Co−Al LDH, Zn−Al LDH, and Co−Zn−Al LDH solutions were used for the preparation of highly dispersed isotactic polypropylene (iPP) nanocomposites. Transmission electron microscopy and wide-angle X-ray diffraction results revealed that the LDH nanoparticles were well dispersed within the iPP matrix. The intention of this study is to understand the influence of the intralayer metal composition of LDH on the various properties of iPP/LDH nanocomposites. The sonicated LDH nanoparticles showed a significant increase in the crystallization rate of iPP; however, not much difference in the crystallization rate of iPP was observed in the presence of different types of LDH. The dynamic mechanical analysis results indicated that the storage modulus of iPP was increased significantly with the addition of LDH. The incorporation of different types of LDH showed no influence on the storage modulus of iPP. But considerable differences were observed in the flame retardancy and thermal stability of iPP with the type of LDH used for the preparation of nanocomposites. The thermal stability (50% weight loss temperature (T0.5)) of the iPP nanocomposite containing three-metal LDH (Co−Zn−Al LDH) is superior to that of the nanocomposites made of two-metal LDH (Co−Al LDH and Zn−Al LDH). Preliminary studies on the flame-retardant properties of iPP/LDH nanocomposites using microscale combustion calorimetry showed that the peak heat release rate was reduced by 39% in the iPP/ Co−Zn−Al LDH nanocomposite containing 6 wt % LDH, which is higher than that of the two-metal LDH containing nanocomposites, iPP/Co−Al LDH (24%) and iPP/Zn−Al LDH (31%). These results demonstrated that the nanocomposites prepared using three-metal LDH showed better thermal and flame-retardant properties compared to the nanocomposites prepared using two-metal LDH. This difference might be due to the better char formation capability of three-metal LDH compared to that of two-metal LDH.en_US
dc.publisherAmerican Chemical Societyen_US
dc.titlePolypropylene/Layered Double Hydroxide Nanocomposites: Influence of LDH Intralayer Metal Constituents on the Properties of Polypropyleneen_US
Appears in Collections:2017

Files in This Item:
File Description SizeFormat 
Polypropylene Layered Double - Nagendra B - ACS Omega.pdf
  Restricted Access
7.75 MBAdobe PDFView/Open Request a copy

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.